James Hardie Siding Installation - FIBER CEMENT SIDING VS VINYL SIDING

When it comes to build or renovate a home, one of the big decisions to be made is which exterior siding to use. Here in this pose, we will compare vinyl siding to James Hardie® fiber cement siding.

Brought in the 1960s, vinyl was developed as an alternative to aluminum siding. While it positively has sufficiently of merits as compared to aluminum, vinyl siding also has a number of confines. To begin with, vinyl can become more brittle with age and contact to the elements. It can be injured by wind debris, hail or any number of other outside forces and may crack, buckle and warp with varying temperatures. In contrast, James Hardie fiber cement siding is found to be more durable and up to 5x thicker in comparison to vinyl exterior siding installation. It easily withstands various elements, battling damage from wind, rain, subzero temperatures and hail, and awards homes years of protection with low maintenance.

HARDIEPLANK SIDING

· 5x thicker than vinyl siding products, providing authentic shadow lines and wood grain texture

· Resists damage from wind, rain, freezing temperatures and hail

· Noncombustible and resists damage from extreme heat

VINYL SIDING

· At 0.05 inches thick, vinyl siding absences a genuine wood appearance

· More affected by elements; less resistant to high winds, temperature extremes and hail

· Susceptible to melting caused by flame, grills and solarheat reflected off Low-E windows

In addition, it is highly recommended to choose a professional for installing Hardie Board Siding. This would ensure that you get the best results for more years in future without worrying about wear and tear earlier than usual.

Apart from being stronger and longer lasting, James Hardie siding installation is also a fabulous way to increase the curb appeal of a home. The design possibilities are boundless with James Hardie’s collection of products, profiles and colors.

When Should I Go for Siding Repair in Vancouver?

In today’s world, vinyl siding emerges out as a fabulous way to augment the aesthetical appeal of your place. It is also true that its time maintenance results into proper functioning and enduring finish. Vinyl is very sensitive of high temperature and this is why Vancouver siding contractors prefer winters for siding renovation in Vancouver. 

According to Siding Repair Vancouver, there are some portions of year when you can save money on your repair estimate—so it may be valuable to wait until the right time if you can. If you want to understand when you should reside your home, there’s a clear answer: it’s generally in the fall. But the reasoning behind that answer requires a bit more explanation. 

If you’re a bit aware of the vinyl siding, you probably know it doesn’t always play nice with the harsh temperature. Being a plastic product, vinyl is just like any plastic, it can melt when it gets exposed to high temperatures.

But even if it doesn’t soften, hot weather causes vinyl siding to expanse and expand to some extent. Nail a plank of vinyl siding to your home in 100-degree weather, and it could be as much as five-eighths of an inch longer than it is in winter. And that size difference is the concern—the increasing siding might bump against the window casings, causing it to buckle and finally fall off.

In the same way, it’s not preferred to install Siding Renovation Vancouver during extreme cold, or typically when temperatures drop below about 50 degrees. Cold weather installations have the opposite problem: cold weather causes the panels to agreement, referring that it’s easy to nail them on too tight.

Similarly, freezing weather tends to make vinyl harder. Therefore, nailing the siding to the wall could make it to crack and break apart. That results into wasted panels—and know what? Your siding company likely isn’t ready to end the bill for them.